Functions Selectable value Default
Text in E-mail 255 characters max. (1-byte
alphanumerics) (2-byte
characters available)
None
Specifying SMTP Authentication
By
specifying the SMTP authentication setting, you can send e-mails to destinations where the e-mail
server carries out SMTP authentication.
By specifying the SMTP authentication setting, you can log on to SMTP servers which require
authentication. The supported authentication protocols are: CRAM MD5, PLAIN, and LOGIN.
If you set [SMTP Authentication Encryption] to [Auto], the printer will try logging on using CRAM MD5,
LOGIN, and then PLAIN.
If you set [SMTP Authentication Encryption] to [On], the printer will try logging on using only CRAM
MD5. If you set [SMTP Authentication Encryption] to [Off], the printer will try logging on using LOGIN
and then PLAIN.
Functions Selectable value Default
SMTP Authentication Active
Inactive
Inactive
SMTP Authentication Name 191 characters max. (1-byte
alphanumerics)
None
SMTP Authentication Password 63 characters max. (1-byte
alphanumerics)
None (No Password)
SMTP Authentication
Encryption
Auto
On
Off
Auto
Specifying POP before SMTP
By
specifying the SMTP authentication setting, you can send e-mails to destinations where the e-mail
server carries out SMTP authentication.
By using POP before SMTP, you can log on to an SMTP server supporting POP before SMTP.
You can specify whether to use POP before SMTP, and specify the POP server name, POP port number,
POP user name, and POP password.
If you set [POP Authentication Encryption] to [Auto], the printer will try logging on by APOP login,
and then in plain text.
Using Web Browser
119
To Next Page
Loading...
