• Long Edge Bind
Default: Off
Blank Pg. Print
Specify whether or not to print blank pages.
• On
• Off
Default: On
Tray Switching
You can set to switch the paper tray.
• Off
• On
Default: Off
Uni-direct.Prt.
Specify whether to print unidirectionally or bidirectionally.
Unidirectional printing produces higher quality print, but bidirectional printing is faster.
• Env.Selector:On
Printing is done unidirectionally or bidirectionally according to the envelope selector position.
If the envelope selector is set to the rear position, printing is done unidirectionally.
If the envelope selector is set to the forward position, printing is done unidirectionally or
bidirectionally according to the paper type.
• Auto Detect
Printing is done unidirectionally or bidirectionally according to the paper type, regardless of the
envelope selector position.
• Always
Printing is always done unidirectionally, regardless of the envelope selector position.
Default: Env.Selector:On
Density
You can adjust the density of the printing color.
• Light
• Standard
• Dark
: Default: Standard
: Default: Dark
Specifying System Settings using the Control Panel (System Menu)
181
To Next Page
Loading...
