If the bypass tray has been detached, be sure to switch the power off before reattaching the tray.
• Depending on how the paper was jammed, printing may resume from the next page, not the one
jammed.
• p.31 "Detaching and Reattaching the Multi Bypass Tray"
•
p.218 "Removing Paper Jammed in Tray 1"
• p.220 "Removing Paper Jammed in Tray 2/Tray 3 (optional)"
• p.222 "Removing Paper Jammed in the Rear Unit (optional)"
• p.223 "Removing Paper Jammed in the Multi Bypass Tray (optional)"
• p.227 "Removing Paper Jammed under the Top Cover"
• p.230 "Removing Paper Jammed around the Guide Board"
• p.237 "If You Cannot Remove Jammed Paper"
7. Troubleshooting
236