1
Safety Information for GelSprinter GX e3300N/GX e3350N/GX e5550N
Introduction
This manual contains detailed instructions and notes on the operation and use of this machine. For your
safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy
place for quick reference.
Read this manual carefully before you use this product and keep it handy for future reference.
Notes:
Contents of this manual are subject to change without prior notice.
In no event will the company be liable for direct, indirect, special, incidental, or consequential damages
as a result of handling or operating the machine.
Some illustrations in this manual might be slightly different from the machine.
Certain options might not be available in some countries. For details, please contact your local dealer.
Depending on which country you are in, certain units may be optional. For details, please contact your
local dealer.
The model names of the machines do not appear in the following pages. Check the type of your ma-
chine before reading this manual.
• Type1: GelSprinter GX e3300N
• Type2: GelSprinter GX e3350N
• Type3: GelSprinter GX e5550N
For good print quality, the supplier recommends that you use genuine print cartridges from the supplier.
The supplier shall not be responsible for any damage or expense that might result from the use of parts
other than genuine parts from the supplier with your office products.
Power Source
• Type1: 100-240 V: 50/60 Hz 1.0-0.6 A
• Type2: 100-120 V: 50/60 Hz 1.0 A
• Type3: 100-120 V: 50/60 Hz 1.2 A
Voltage must not fluctuate more than 10%.
Please be sure to connect the power cable to a power source as above.
Confirm that the wall outlet is near the machine and freely accessible, so that in event of an emergency,
it can be unplugged easily.
RheingauP1_SafetyInfo_F2-EN_FM_forPaper.book Page 1 Monday, July 6, 2009 3:29 PM
To Next Page
Loading...
