4. Read the entire license agreement carefully. If you accept its terms, click [I accept the
agreement.], and then click [Next >].
5. Click [Connected via LAN].
6. Select the [Printer Name:] check box to select the printer models you want to use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.
7. Double-click the printer name or click [+] to display the printer settings.
The details shown in [Comment:], [Driver:], and [Port:] vary depending on the operating system, printer
model, and port.
8. Click [Port:], and then click [Add].
9. Click [Network Printer], and then click [OK].
10. Double-click the computer name you want to use as a print server in the [Browse for Printer]
window.
11. Select the printer you want to use, and then click [OK].
12. Check that the port of the selected printer is displayed in [Port:].
13. Configure the user code as necessary.
For an RPCS raster printer driver, a user code can be set after the printer driver installation. For
information about user code, see the printer driver Help.
14. Select the [Default Printer] check box to configure the printer as default.
15. Click [Continue].
The printer driver installation starts.
16. Select whether or not to open the Status monitor automatically.
17. Click [Next >].
18. Click [Finish] in the installation completion dialog box.
• If the message "Digital Signature Not Found" or the [Software Installation] , [Hardware Installation]
or [Windows can't verify the publisher of this driver software] dialog box appears:
• Click
[Yes], [Continue Anyway] or [Install this driver software anyway] to continue the installation.
• A message about restarting the computer may appear. Restart the computer to complete installation.
• A message appears if there is a newer version of the printer driver already installed. If there is, you
cannot install the printer driver using Auto Run. If you still want to install the printer driver, use [Add
Printer]. See p.249 "If a Message Appears during Installation".
•
p.68 "Setting Up a Server"
2. Preparing for Printing
80
To Next Page
Loading...
