The machine has three energy-saver modes: the Low Power Mode, the Transit Mode, and the Night/Off
Mode. The Transit
Mode continues for about two seconds (probably, the user does not recognize this mode
when it occurs). The table lists the status of several components.
Operation panel Engine Exhaust fan
Operating Mode* On On On
Low Power Mode Off On Off
Transit Mode Off On Off
Night/Off Mode Off Off** Off
• *: The "Operating Mode" here refers to all the modes (or status) other than the Low Power Mode and
Night/Off Mode. Actual power consumption (during the Operating Mode) depends on job status
and environmental conditions.
• **: The SRAM is alive and backs up the engine controller.
AOF
When
AOF is off, the engine controller is unable to start the Night/Off Mode. The user should keep AOF
on (User Tools > System Settings > Key Operator Tools > AOF).
Timers
Energy Save
201
To Next Page
Loading...
