4929*
Positive/Negative [0 = No, 1 = Yes]
Inverts white and black. This setting is only applied to the originals in SP 4921.
4929 1 Positive/Negative (Copy)
4930*
Sharpness-Edge [–2 to 2 / 0 / 1/step]
Adjust the clarity. This setting is only applied to the originals in SP 4921.
4930 1 Sharpness-Edge (Copy)
4930 3 Sharpness-Edge (Scanner)
4931*
Sharpness-Solid [–2 to 2 / 0 / 1/step]
Adjust the clarity. This setting is only applied to the originals in SP 4921.
4931 1 Sharpness-Solid (Copy)
4931 3 Sharpness-Solid (Scanner)
4932*
Sharpness-Low ID [–2 to 2 / 0 / 1/step]
Adjust the clarity. This setting is only applied to the originals in SP 4921.
4932 1 Sharpness- Low ID (Copy)
4941* White Line Erase [0 to 2 / 1 / 1/step]
4941 1
Selects the white line erase level.
0: None, 1: Weak, 2: Strong
This setting is effective only Photo 1, Photo 3, Special 3 or Special 4 mode.
0: White line erase is not used, and white level correction is used instead.
This setting is applied regardless of what mode has been selected in SP 4921.
4942* Black Line Erase [0 to 3 / 2 / 1/step]
4942 1
Selects the black line erase level. This setting is effective only when originals are scanned
by the A(R)DF.
[0 = No / 1 = Very weak / 2 = Weak / 3 = Strong]
This setting is applied regardless of what mode has been selected in SP 4921.
SP Mode Tables
37
To Next Page
Loading...
