Sub Transmission Mode
151
2
A Place the original, and then select the scan settings you require.
B Press [Sub TX Mode].
C Select [Options].
D Press [Programmed Name] for Label Insertion.
Press [Off] if you do not want to insert a destination.
To cancel the option settings, press [Cancel].
E Press [OK] twice.
F Specify the destination, and then press the {Start} key.
Note
❒ You can program one of the Quick Operation keys with operations for this
function. Using the Quick Operation key allows you to omit steps
B
through
E
.
❒ To print a standard message that is not programmed as a default, program
it in advance in “Program / Change / Delete Standard Message” in the
Facsimile Features menu.
Reference
p.143 “Standard Message Stamp”
“Facsimile Features”, General Settings Guide
To Next Page
Loading...
