Bit Switches - 3
D418 108 SM
Communication Switch 17 (SP No. 1-104-024)
No Function Comments
1: Enabled disabled.
2
PWD reception
0: Disabled
1: Enabled
0: Disables features that require PWD
(Password) signal reception.
3-4 Not used Do not change the settings.
5
PSTN dial-in routing
0: Off
1: On
Enables or disables the dial-in routing for PSTN
connection.
6
Not used
Do not change the settings.
7
Action when there is no box
with an F-code that matches
the received SUB code
0: Disconnect the line
1: Receive the message
(using normal reception mode)
Change this setting when the customer requires.
Communication Switch 18 (SP No. 1-104-025)
No Function Comments
0-4 Not used Do not change the settings.
5
IP-Fax dial-in routing selection
0: Off
1: On
1: Transfers received data to each IP-Fax dial-in
number.
The IP-Fax dial-in number is a 4 digit-number.
6
PSTN 2 dial-in routing
0: Off
1: On
Enables or disables the dial-in routing for PSTN 2
connection.
7 PSTN 3 dial-in routing Enables or disables the dial-in routing for PSTN 3
To Next Page
Loading...
Need help?
General