Service Call Conditions
D062/D063/D065/D066 3-68 SM Appendix
3. DeskTopBinder/Print Job Manager/Desk Top Editor job history will be cleared
4. Documents stored on the document server will not be lost.
5. The first time the network accesses the machine, the management information must
be reconfigured (this will require a significant amount of time).
6. Execute SP5832 011 then turn the machine off and on.
Recovery Procedure 3
If "Procedure 2" does not solve the problem, execute SP5832 001 (HDD Formatting - All),
then turn the machine off and on.
Executing SP5832 001 erases all document and address book data stored on the hard
disks. Be sure to consult with the customer before executing this SP code.
Recovery Procedure 4
If "Recovery Procedures 1 to 3" fail to correct the problem, replace the HDD.
910 D External Controller Error 1
911 D External Controller Error 2
912 D External Controller Error 3
913 D External Controller Error 4
914 D External Controller Error 5
The external controller alerted the machine about an error.
Please refer to the instructions for the external controller.
External Controller Error 6
While EAC (External Application Converter), the conversion module, was
operating normally, the receipt of a power line interrupt signal from the
FLUTE serial driver was detected, of BREAK signal from the other station
was detected.
919 B
Power outage at the EFI controller.
EFI controller was rebooted.
Connection to EFI controller loose.
To Next Page
Loading...
Need help?
General