Service Program Mode Tables
D062/D063/D065/D066 4-90 SM Appendix
[0: OFF] [1:ON]
0: OFF
Paper feeds out with stapling at the maximum number of the finishing stapling
when the machine gets a multiple printing job (over maximum number).
1: ON
Paper feeds out without stapling at the maximum number of the finisher stapling
when the machine gets a multiple printing job (over maximum number)
5212 Page Numbering
003 Duplex Printout Left/Right Position
Horizontally positions the page numbers printed on both sides during duplexing.
[-10 to +10/1 mm]
0 is center, minus is left, + is right.
004 Duplex Printout High/Low Position
Vertically positions the page numbers printed on both sides during duplexing.
[-10 to +10/1 mm]
0 is center, minus is down, + is up.
5227 Page Numbering (Bates Stamp)
Change Page No. Display
200
This SP code determines whether the page number adjustment display is on or
off.
[0 to 1/0/1]
0: Display off, 1: Display on
201 Allow Page No. Entry
This SP specifies the number of digits to display for the entry of the starting page
number.
[2 to 9/9/1]
202 Zero Surplus Setting
⇒
Rev. 11/20/2009
To Next Page
Loading...
Need help?
General