Service Program Mode Tables
SM Appendix 4-89 D062/D063/D065/D066
Appendix:
Service
Program
Mode Tables
[0 to 1/0/1]
0: Normal, 1:Allow Expansion
5188 Copy NV Version
Copies NV version to another NVRAM.
Note: NVRAM version management automatically initializes the NV for each
machine.
5191 Mode Set
This setting determines whether the machine is allowed to move into energy
save mode.
1: Allowed
0: Not allowed
5195 Limitless SW
Selects the paper feed mode priority (productivity or tray). This is activated only
when a customer selects the "Auto paper Select".
Productivity priority. Changes the feed station as soon as the machine
detects the priority tray even the paper still remains in the current tray.
Tray priority. This changes the feeding tray after the paper in the tray where
the machine has been feeding paper has run out of paper.
[0 to 1/0/1]
0: Productivity priority
1: Tray priority
5196 CE Login
0: Does not execute CE Login or 1: Execute CE login
5199 Paper Set After Staple End
Enables or disables feeding out of the finisher without stapling.
To Next Page
Loading...
Need help?
General