Problem Causes Solutions
"Please wait." appears. This message appears when
the machine is warming up.
• Wait until the message
disappears. Do not turn off the
main power switch while the
message is displayed.
• If the machine does not get ready
in nine minutes, contact your
service representative.
"Please wait." appears.
This message appears when
you change the toner
cartridge.
• Wait until the message
disappears. Do not turn off the
main power switch while the
message is displayed.
• If the message does not
disappear in six minutes, contact
your service representative.
"Memory is full. Do you
want to store scanned file?"
appears.
The scanned originals
exceed the number of
sheets/pages that can be
stored on the hard disk.
•
Press [Yes] to store pages that
have been scanned. Delete
unnecessary files by pressing
[Delete File].
• Press [No] if you are not storing
pages that have been scanned.
Delete unnecessary files by
pressing [Delete File].
"Self checking..." appears. The machine is performing
image adjustment
operations.
The machine may perform periodic
maintenance during operations. The
frequency and duration of
maintenance depends on the humidity,
temperature, and printing factors such
as number of prints, paper size, and
paper type. Wait for the machine to
get ready.
The user code entry screen is
displayed.
Users are restricted by User
Code Authentication.
For details about how to log in when
User Code Authentication is enabled,
see "When the Authentication Screen is
Displayed", Getting Started
.
10. Troubleshooting
152
To Next Page
Loading...
Need help?
General
