6. Press [ ].
7. Select [Integration Server Authentication], and then press [Authentication Info] next to it.
If you do not want to use user authentication management, select [Off].
8. Press [Server Name].
Specify the name of the server for external authentication.
9. Enter the server name, and then press [OK].
Enter the IPv4 address or host name.
10. Press [Authentication Type].
11. Select the authentication system for external authentication, and then press [OK].
Select an available authentication system. For general usage, select [Default].
2. Configuring User Authentication
58
To Next Page
Loading...
Need help?
General
