12. Press [Domain Name].
13. Enter the domain name, and then press [OK].
You cannot specify a domain name under an authentication system that does not support domain
login.
14. Press [Obtain URL].
The machine obtains the URL of the server specified in "Server Name".
If "Server Name" or the setting for enabling SSL is changed after obtaining the URL, the URL is "Not
Obtained".
15. Press [Exit].
16. Press [ ].
In the "Authentication Type", if you have not registered a group, proceed to step 25.
If you have registered a group, proceed to step 17.
If you set "Authentication Type" to [Windows (Native)] or [Windows (NT Compatible)], you can
use the global group.
If you set "Authentication Type" to [Notes], you can use the Notes group. If you set "Authentication
Type" to [Basic (Integration Server)], you can use the groups created using the Authentication
Manager.
Integration Server Authentication
59
To Next Page
Loading...
Need help?
General
