Error Code Cause Solution
B0207-001 An authentication error occurred
because the Address Book is being
used at another location.
Wait a few minutes and then try
again.
B0208-000 The account is locked because you
have reached the maximum number
of failed authentication attempts
allowed.
Ask the user administrator to unlock
the account.
Windows authentication
Error Code Cause Solution
W0103-000 A TWAIN operation occurred
during authentication.
Make sure no other user is logged in
to the machine, and then try again.
W0107-000 Failed to encrypt password. 1. A password error occurred.
Make sure the password is entered
correctly.
2. Either [DES] or [AES] is selected
for "Driver Encryption
Key:Encryption Strength".
The administrator has restricted use
of simple encryption. You can use
the encryption key if it has been
specified in the driver.
3. A driver encryption key error
occurred.
Make sure that the encryption key is
correctly specified on the driver.
W0107-000 A login user name was not specified
but a DeskTopBinder operation was
performed.
Set the DeskTopBinder login user
name correctly.
W0206-002 The user attempted authentication
from an application on the "System
Settings" screen, where only the
administrator has authentication
ability.
Only the administrator has login
privileges on this screen.
Log in as a general user from the
application's login screen.
If Authentication Fails
281
To Next Page
Loading...
Need help?
General
