Message Problem and solutions
Printer <printer name> has no queue The print queue is not assigned to the printer when
the print server was online. Assign the print queue
to the printer using NetWare administrator
account, and then restart the printer.
Print
queue
<print
queue
name>
cannot
be
serviced
by printer 0, <print server name>
The print queue cannot be established when the
print server is online. Make sure that the print queue
exists on the specified file server.
Print server <print server name> has no printer The printer was not assigned to the print server
when the print server was online. Use the NetWare
administrator account to assign the printer, and
then restart the printer.
Print sessions full No more print jobs can be accepted. Wait a while
before sending any more print jobs.
pserver start. (NetWare) NetWare service has started in print server mode
at the print server operation.
Required file server (<file server name>) not found The required file server <file server name> could
not be found.
restarted. The LPD has started.
sap enable. saptype=<SAP type>, sapname=<SAP
name>
The SAP function was started. The SAP packet is
issued to advertise the service in the SAP table on
the NetWare server.
server certificate invalid The server ID is disabled. Check the server
authentication.
server identity invalid The server ID is disabled. Check the server
authentication.
server not trusted The RADIUS server cannot be trusted.
session_IPv4 <community name> not defined. The requested community name is not defined.
session_IPv6 <community name> not defined. The requested community name is not defined.
session_IPX <community name> not defined. The requested community name is not defined.
Set context to <NDS context name> The NDS context name <NDS context name> has
been set.
Message List
193
To Next Page
Loading...
