Sets the machine to detect a dial tone before dialing the
destination fax number.
• Detect. (Default) Detects dial tone before dialing remove fax
number.
• Do Not Detect. Does not wait for dial tone before dialing
remote fax number.
Transmission Speed
Sets the transmission speed for the fax modem.
•
33.6 Kbps (Default)
•
2.4 to 33.6 Kbps
Note: A slower speed may be required in areas where the
telephone lines are in poor condition.
Reception Speed
Sets the reception speed for the fax modem.
• 33.6 Kbps (Default)
•
2.4 to 33.6 Kbps
Note: A slower speed may be required in areas where the
telephone lines are in poor condition.
Dial/Push Phone
Specifies the type of line connected to the machine's fax modem.
• Push Phone. (Default) Tone dial.
• Dial Phone (10 PPS). Rotary dial.
PSTN/PBX
Specifies how the telephone line is routed.
• PSTN. Line connection through PSTN.
• PBX. Line connection through PBX. The number to access
and outside line must be entered for "PBX Access Number"
(see below).
PBX Access Number
Utilities
187
To Next Page
Loading...
