Fax Option (D432) Installation
SM 3 D432/D433
D432/D433
Fax Option
Type
C2550/C2530
3. Press down the MBU [A].
Make sure that the MBU is seated correctly. If not, SC672 occurs.
4. Remove the jumper [B] (set to OFF) and set it to ON.
The machine may issue SC819 or SC820 if the jumper is not set to "ON"
correctly. (Sometimes these SC codes are not issued.)
5. Install the FCU [A] ( x 2; removed in step 3).
6. Write the serial number of the fax unit on the serial number decal, and then attach this
decal to the bracket [B] of the fax unit.
7. Attach the ferrite core to the telephone cord.
To Next Page
Loading...
