Card Save Function
SM 5-39 D037/D038/D040/D041
System
Maintenance
Reference
15. As soon as the printer receives the data, it will be stored on the SD card automatically
with no print output. Nothing is displayed on the screen, indicating that a Card Save
operation was successful.
16. Press “Offline” and then the “Clear/Stop” button to exit Card Save mode.
17. Change the Bit Switch Settings back to the default 00000000. Press the “#” button in
the numeric keypad to register the changes.
18. Remove the SD card after the main power switch is turned off.
For D037/D040
1. Turn the main power switch OFF.
To Next Page
Loading...
