Ricoh D037 - Stamp Solenoid and Original Exit Sensor

Electrical Components
SM 7 D366
ARDF DF3030
D366
( x 1, x 1)
1.3.5 STAMP SOLENOID AND ORIGINAL EXIT SENSOR
1. Open the ARDF.
2. Remove the left edge of the platen sheet.
3. Release the hook [A].
4. Open the original exit guide plate [B]
5. Stamp solenoid [C] (
x 1, x 1)
6. Original exit sensor [D] (
x 1, hook x 1)