Fax Option (D432) Installation
D432/D433 2 SM
1.1.2 FAX OPTION INSTALLATION PROCEDURE
Before installation, print out all data in the printer buffer.
Push the operation switch to put the machine in standby mode. Make sure the
power LED is off, turn the main switch off, and then disconnect the power cord and
the network cable.
The copier must be connected to a properly grounded socket outlet.
1. For NA models, attach the FCC decal near the serial number plate of the mainframe.
2. Remove the FCU cover [A] ( x 2).
To Next Page
Loading...
