Fax Option (D433) Installation
SM 7 D432/D433
D432/D433
Fax Option
Type
C2550/C2530
The copier must be connected to a properly grounded socket outlet.
1. Remove the FCU cover [A] ( x 2).
2. Press down the MBU [A].
Make sure that the MBU is seated correctly. If not, SC672 occurs.
3. Remove the jumper [B] (set to OFF) and set it to ON.
The machine may issue SC819 or SC820 if the jumper is not set to "ON"
correctly. (Sometimes these SC codes are not issued.)
To Next Page
Loading...
