Fax Option (D433) Installation
SM 9 D432/D433
D432/D433
Fax Option
Type
C2550/C2530
12. Attach the Super G3 decal [A].
13. Plug in the machine and turn on the main power switch.
After you turn the machine on, if you see a message that tells you the SRAM
has been formatted due to a problem with SRAM, turn the machine off and on
again to clear the message.
14. Enter the "User Tools" mode and set date and time.
15. Do SP3102 in the fax SP mode and enter the serial number for the fax unit.
16. Enter the correct country code with SP1101-016 (System SW 0F, Country/area code
for functional settings).
17. Exit the SP mode, and turn the machine off and on.
To Next Page
Loading...
