Machine Configuration
SM 1-3 D037/D038/D040/D041
Product
Information
Item
Machine
Code
Call
out
Remarks
1-bin tray D426 [11]
Shift tray D388 [10]
Internal finisher D429 [9]
One of the following 4 choices: [9] only, [10] only,
[11] only, or [10]+[11]
Punch unit: 2/3
holes
D390-17 Requires [9].
Punch unit: 2
holes
D390-27 Requires [9].
Punch unit: 4
holes
D390-31
[8]
Requires [9].
Two-tray paper
feed unit
D331 [5]
One-tray paper
feed unit
D425 [6]
Caster Table D448 [7]
One from [5], [6], and [7];
The one-tray PFU [6] requires [7].
If neither [5] nor [6] is installed, install [7] if
required by the customer.
Item Machine code Remark
USB2.0/SD Slot D422 -
Fax Option D432
Memory Unit Type B G578
SAF memory:
Requires the Fax Option.
Hand Set B433
For NA model only: Requires
the Fax Option.
Gigabit Ethernet G874
IEEE 1284 B679
You can only install one of
these at a time.
⇒
Rev. 04/15/2009
To Next Page
Loading...
