System Service Mode
SM Appendix 9-31 D037/D038/D040/D041
Appendix:
SP Mode
Tables
[Erase Margin Adjust] (Area, Paper Size)
2103
Adjusts the erase margin by deleting image data at the margins.
001 Lead Edge *ENG
002 Trailing Edge *ENG
[0 to 9.9 / 4.2 / 0.1 mm/step]
003 Left *ENG
004 Right *ENG
[0 to 9.9 / 2 / 0.1 mm/step]
2104 [LD Initial Power Adjust]
001 Bk *ENG
002 C *ENG
003 M *ENG
004 Y *ENG
[80 to 120 / 100 / 1 %/step]
2105 [LD Power Adjust] (Process Speed, Color)
Adjusts the LD power of each color for each process speed.
Each LD power setting is decided by process control.
High Speed: 120 mm/sec,Low Speed: 60 mm/sec
001 Bk: High Speed *ENG
002 C: High Speed *ENG
003 M: High Speed *ENG
004 Y: High Speed *ENG
009 Bk: Low Speed *ENG
010 C: Low Speed *ENG
011 M: Low Speed *ENG
012 Y: Low Speed *ENG
[50 to 120 / 100 / 1%/step]
Decreasing a value makes lines
thinner on the output.
Increasing a value makes lines
thicker on the output.
To Next Page
Loading...
