System Service Mode
SM Appendix 9-59 D037/D038/D040/D041
Appendix:
SP Mode
Tables
Normal: 120 mm/sec, Low: 60mm/sec
001 Paper Transfer: Standard: 1st *ENG
[0 to 200 / 20 / 1 –μA /step]
002 Paper Transfer: Standard: 2nd *ENG
[0 to 200 / 23 / 1 –μA /step]
003 Paper Transfer: Low: 1st *ENG
004 Paper Transfer: Low: 2nd *ENG
[0 to 200 / 12 / 1 –μA /step]
[Plain: Bias: FC]
2407
Adjusts the current for the paper transfer roller for plain paper in full color
mode.
Normal: 120 mm/sec, Low: 60mm/sec
001 Paper Transfer: Standard: 1st *ENG
[0 to 200 / 25 / 1 –μA /step]
002 Paper Transfer: Standard: 2nd *ENG
[0 to 200 / 28 / 1 –μA /step]
003 Paper Transfer: Low: 1st *ENG
[0 to 200 / 13 / 1 –μA /step]
004 Paper Transfer: Low: 2nd *ENG
[0 to 200 / 14 / 1 –μA /step]
[Plain-T:SizeCorrect:BW]
2411
Adjusts the size correction coefficient for the paper transfer roller current for
each paper size. SP2403 and SP2407 are multiplied by these SP values.
Normal: 120 mm/sec, Low: 60mm/sec
001 Paper Transfer: Standard: 1st: S1 *ENG
002 Paper Transfer: Standard: 2nd: S1 *ENG
003 Paper Transfer: Low: 1st: S1 *ENG
004 Paper Transfer: Low: 2nd: S1 *ENG
[100 to 4000 / 100 / 5%/step]
S1 size ≥ 290 mm (Paper width)
005 Paper Transfer: Standard: 1st: S2 *ENG
[100 to 4000 / 140 / 5%/step]
290 mm ≥ S2 size ≥ 250 mm
(Paper width)
To Next Page
Loading...
