Ricoh D037 - Page 595

System Service Mode
SM Appendix 9-61 D037/D038/D040/D041
Appendix:
SP Mode
Tables
016 Paper Transfer: Low 2nd side: S4 *ENG
[100 to 4000 / 360 / 5%/step]
194 mm ≥ S4 size ≥ 150 mm
(Paper width)
017 Paper Transfer: Standard: 1st: S5 *ENG
[100 to 4000 / 200 / 5%/step]
150 mm ≥ S5 size (Paper width)
018 Paper Transfer: Standard: 2nd: S5 *ENG
[100 to 4000 / 340 / 5%/step]
150 mm ≥ S5 size (Paper width)
019 Paper Transfer: Low: 1st: S5 *ENG
[100 to 4000 / 210 / 5%/step]
150 mm ≥ S5 size (Paper width)
020 Paper Transfer: Low 2nd: S5 *ENG
[100 to 4000 / 420 / 5%/step]
150 mm ≥ S5 size (Paper width)
[Plain-T:SizeCorrect:FC]
2412
Adjusts the size correction coefficient for the paper transfer roller current for
each paper size. SP2403 and SP2407 are multiplied by these SP values.
Normal: 120 mm/sec, Low: 60mm/sec
001 Paper Transfer: Standard l: 1st: S1 *ENG
002 Paper Transfer: Standard: 2nd: S1 *ENG
003 Paper Transfer: Low: 1st: S1 *ENG
004 Paper Transfer: Low: 2nd: S1 *ENG
[100 to 4000 / 100 / 5%/step]
S1 size ≥ 290 mm (Paper width)
005 Paper Transfer: Standard: 1st: S2 *ENG
[100 to 4000 / 130 / 5%/step]
290 mm ≥ S2 size ≥ 250 mm
(Paper width)
006 Paper Transfer: Standard: 2nd: S2 *ENG
[100 to 4000 / 160 / 5%/step]
290 mm ≥ S2 size ≥ 250 mm
(Paper width)
007 Paper Transfer: Low: 1st: S2 *ENG
[100 to 4000 / 140 / 5%/step]
290 mm ≥ S2 size ≥ 250 mm
(Paper width)