Ricoh D037 - Page 706

System Service Mode
D037/D038/D040/D041 9-172 SM Appendix
Irregular Dots. Set higher for stronger effect, lower for weaker effect.
0: Not activated
Texture Erase: 0 *ENG
[0 to 2 / 0 / 1 /step]
-010
Sets the erasure level of textures. Set higher for stronger effect, lower for
weaker effect. This SP (suffix "-010") only exists in SP4580, 4582 and 4583.
0: Not activated
4581 [FAX Appl.: Text] DFU
4584 [FAX Appl.: Original 1] DFU
4585 [FAX Appl.: Original 2] DFU
MTF: 0 (Off), 1-15 (Strong) *ENG
[0 to 15 / 8 / 1 /step]
0: MTF Off
-005
Sets the MTF level (Modulation Transfer Function) designed to improve image
contrast. Set higher for stronger effect, lower for weaker effect.
Smoothing: 0 (x1), 1-7 (Strong) *ENG
[0 to 7 / 4 / 1 /step]
-006
Use to remove "jaggies" if they appear. Set higher for smoother images.
Brightness: 1–255 *ENG
[1 to 255 / 128 / 1 /step]
-007
Set higher for darker, set lower for lighter.
Contrast: 1–255 *ENG
[1 to 255 / 128 / 1 /step]
-008
Set higher for more contrast, set lower for less contrast.
I Dot Erase (0), 1-7 (Strong) *ENG
[0 to 7 / 0 / 1 /step]
-009
Selects the contrast level for B/W the Text mode. Sets the erasure level of
Irregular Dots. Set higher for stronger effect, lower for weaker effect.
0: Not activated
4600 [SBU Version Display]