System Service Mode
SM Appendix 9-191 D037/D038/D040/D041
Appendix:
SP Mode
Tables
001 MF Key Card Extension *CTL
[0: Not installed/ 1: Installed (scanning
accounting)]
5118 [Disable Copying]
*CTL
[0: Not disabled/ 1: Disabled]
001 This program disables copying.
5120
[Mode Clear Opt.
Counter Removal]
*CTL
[0: Yes (removed)/ 1: Standby (installed but
not used)/ 2: No (not removed)]
001
This program updates the information on the optional counter. When you install
or remove an optional counter, check the settings.
5121 [Counter Up Timing]
*CTL
[0: Feed/ 1: Exit]
001
This program specifies when the counter goes up. The settings refer to “paper
feed” and “paper exit” respectively.
5126 [F Size Original Setting]
*ENG
[0 to 2 / 0 / 1 /step]
0: 8 1/2" x 13" (Foolscap)
1: 8 1/4" x 13" (Folio)
2: 8" x 13" (F)
001 Selects F size original setting.
5127 [APS Mode]
*CTL
[0: Not disabled/ 1: Disabled]
001 This program disables the APS.
5128 [Code Mode With Key/Card Option]
*CTL -
001
DFU
5131 [Paper Size Type Selection]
*ENG [0: JP (Japan)/ 1: NA / 2: EU]
To Next Page
Loading...
