Ricoh D037 - Page 727

System Service Mode
SM Appendix 9-193 D037/D038/D040/D041
Appendix:
SP Mode
Tables
001 - *ENG
[0 or 1 / 0 / 1/step]
0: OFF
1: ON (Paper size error message is
displayed when the paper jam occurs due
to the wrong direction of set paper in
by-pass mode.)
[Size Adjust]
5181
Adjusts the paper size for each tray.
001 TRAY 1:1 *ENG
[0 to 1 / 0 (EU/ASIA), 1 (NA) / 1 /step]
0: A4 LEF, 1: LT LEF
002 TRAY 1: 2 *ENG
[0 or 1 / 0 (EU/ASIA), 1 (NA) / - ]
0: A3, 1: DLT
003 TRAY 1: 3 *ENG
[0 or 1 / 0 (EU/ASIA), 1 (NA) / - ]
0: B4, 1: LG
004 TRAY 1: 4 *ENG
[0 or 1 / 0 (EU/ASIA), 1 (NA) / - ]
0: B5 LEF, 1: Exe LEF
005 TRAY 2: 1 *ENG
[0 or 1 / 0 (EU/ASIA), 1 (NA) / - ]
0: A4 LEF, 1: LT LEF
006 TRAY 2: 2 *ENG
[0 or 1 / 0 (EU/ASIA), 1 (NA) / - ]
0: A3, 1: DLT
007 TRAY 2: 3 *ENG
[0 or 1 / 0 (EU/ASIA), 1 (NA) / - ]
0: B4, 1: LG
008 TRAY 2: 4 *ENG
[0 or 1 / 0 (EU/ASIA), 1 (NA) / - ]
0: B5 LEF, 1: Exe LEF
009 TRAY 3: 1 *ENG
[0 or 1 / 0 (EU/ASIA), 1 (NA) / - ]
0: A4 LEF, 1: LT LEF
010 TRAY 3: 2 *ENG
[0 or 1 / 0 (EU/ASIA), 1 (NA) / - ]
0: A3, 1: DLT