System Service Mode
D037/D038/D040/D041 9-202 SM Appendix
[Authentication Error Code]
5481
These SP codes determine how the authentication failures are displayed.
001 System Log Disp *CTL
Determines whether an error code
appears in the system log after a user
authentication failure occurs.
[0 to 1 / 0 / 1]
0: Off, 1: On
002 Panel Disp *CTL
Determines whether an error code
appears on the operation panel after a
user authentication failure occurs.
[0 to 1 / 1 / 1]
1: On, 0: Off
5490 [MF Key Card (Japan only)]
001 - *CTL
Sets up operation of the machine with a
keycard.
[0 to 1 / 0 / 1]
0: Disabled. Cancels operation without a
user code.
1: Enabled. Allows operation without a
user code.
002 Count Mode Setting *CTL -
5501 [PM Alarm]
001 PM Alarm Level *CTL
Sets the PM alarm interval
[0 to 9999 / 0 / 1k printouts / step]
0: No PM Alarm
002 Original Count Alarm *CTL -
To Next Page
Loading...
