Ricoh D037 - Page 839

System Service Mode
SM Appendix 9-305 D037/D038/D040/D041
Appendix:
SP Mode
Tables
Scan PGS/Mode *CTL
[0 to 9999999/ 0 / 1]
8 231
These SPs count the number of pages scanned by each ADF mode to
determine the work load on the ADF.
8 231 1 Large Volume
Selectable. Large copy jobs that cannot be
loaded in the ADF at one time.
8 231 2 SADF
Selectable. Feeding pages one by one through
the ADF.
8 231 3 Mixed Size
Selectable. Select “Mixed Sizes” on the
operation panel.
8 231 4 Custom Size Selectable. Originals of non-standard size.
8 231 5 Platen
Book mode. Raising the ADF and placing the
original directly on the platen.
8 231 6 Mixed 1side/2side -
 If the scan mode is changed during the job, for example, if the user switches from ADF
to Platen mode, the count is done for the last selected mode.
 The user cannot select mixed sizes or non-standard sizes with the fax application so if
the original’s page sizes are mixed or non-standard, these are not counted.
 If the user selects “Mixed Sizes” for copying in the platen mode, the Mixed Size count is
enabled.
 In the SADF mode if the user copies 1 page in platen mode and then copies 2 pages
with SADF, the Platen count is 1 and the SADF count is 3.
T:Scan PGS/Org *CTL
[0 to 9999999/ 0 / 1]
8 241
These SPs count the total number of scanned pages by original type for all
jobs, regardless of which application was used.
C:Scan PGS/Org *CTL
[0 to 9999999/ 0 / 1]
8 242
These SPs count the number of pages scanned by original type for Copy
jobs.