Ricoh D148 - Page 1053

Main SP Tables-2-2
D146/D147/D148/D149/D150 2-334 System Maintenance Section
2675
[Sp3Thick:LeadingEdgeCorrection]
Sets output value [%] for paper transfer ampere leading edge correction per
printing sides of special paper 3 using thick paper setting. “Thick paper” means
thick paper 2 or upper with model D148/D149/D150, thick paper 1 or upper with
model D146/D147.
003 Paper Transfer:1side *ENG [0 to 995 / 100 / 5%/step]
004 Paper Transfer:2side *ENG [0 to 995 / 100 / 5%/step]
2676
[Sp3Thick:SwitchTimingLeadEdge]
Sets switch timing for paper transfer ampere leading edge correction per
printing sides of special paper 3 using thick paper setting. “Thick paper” means
thick paper 2 or upper with model D148/D149/D150, thick paper 1 or upper with
model D146/D147.
003 Paper Transfer:1side *ENG [0 to 50 / 0 / 2mm/step]
004 Paper Transfer:2side *ENG [0 to 50 / 0 / 2mm/step]
2677
[Sp3Thick:TrailEdgeCorrection]
Sets output value [%] for paper transfer ampere trailing edge correction per
printing sides of special paper 3 using thick paper setting. “Thick paper” means
thick paper 2 or upper with model D148/D149/D150, thick paper 1 or upper with
model D146/D147.
003 Paper Transfer:1side *ENG [0 to 995 / 100 / 5%/step]
004 Paper Transfer:2side *ENG [0 to 995 / 100 / 5%/step]
2678
[Sp3Thick:SwitchTimingTrailEdge]
Sets switch timing for paper transfer ampere trailing edge correction per printing
sides of special paper 3 using thick paper setting. “Thick paper” means thick
paper 2 or upper with model D148/D149/D150, thick paper 1 or upper with
model D146/D147.
003 Paper Transfer:1side *ENG [0 to 50 / 0 / 2mm/step]
004 Paper Transfer:2side *ENG [0 to 50 / 0 / 2mm/step]