Ricoh D148 - Page 1054

Main SP Tables-2-2
System Maintenance Section 2-335 D146/D147/D148/D149/D150
SP Mode Tables
2690 [ITB Contact Setting]
001
Thick1 *ENG [0 or 1 / 0 / 1/step]
Enter 1 when outputting in B&W monochrome but using all OPC drum (FC
mode) with Thick paper 1.
002
Thick2 *ENG [0 or 1 / 0 / 1/step]
Enter 1 when outputting in B&W monochrome but using all OPC drum (FC
mode) with Thick paper 2.
003
Thick3 *ENG [0 or 1 / 0 / 1/step]
Enter 1 when outputting in B&W monochrome but using all OPC drum (FC
mode) with Thick paper 3.
004
Thick4 *ENG [0 or 1 / 0 / 1/step]
Enter 1 when outputting in B&W monochrome but using all OPC drum (FC
mode) with Thick paper 4.
014
Special1Thick1234 *ENG [0 or 1 / 0 / 1/step]
Enter 1 when outputting in B&W monochrome but using all OPC drum (FC
mode) with Thick paper 1234 and special paper 1.
015
Special2Thick1234 *ENG [0 or 1 / 0 / 1/step]
Enter 1 when outputting in B&W monochrome but using all OPC drum (FC
mode) with Thick paper 1234 and special paper 2.
016
Special3Thick1234 *ENG [0 or 1 / 0 / 1/step]
Enter 1 when outputting in B&W monochrome but using all OPC drum (FC
mode) with Thick paper 1234 and special paper 3.
2703
[Thick4:Bias:BW]
Sets paper transfer ampere per thickness / mode (FC/BW) / printing sides.
003 PaperTransfer:1side *ENG
[0 to (D146: 200, D147: 200, D148:
250, D149: 250, D150: 250) / 11 /
1-uA/step]