Ricoh D148 - Page 1088

Main SP Tables-3
System Maintenance Section 2-369 D146/D147/D148/D149/D150
SP Mode Tables
114 TC Mid Spd:Y *ENG
121 TC Low Spd:K *ENG
122 TC Low Spd:C *ENG
123 TC Low Spd:M *ENG
124 TC Low Spd:Y *ENG
3214
[Vt Save :Set]
Saves Vt based to image area ratio.
001 Coverage Thresh *ENG [0 to 100 / 20 / 1%/step]
3218 [Vt Err Flag :Disp]
001
UppErr Flag: K *ENG [0 or 1 / 0 / 1/step]
Sets flag "1" when Vt(K) excesses Vt upper limit error threshold (SP3-221-002)
even 1 time.
002
UppErr Flag: C *ENG [0 or 1 / 0 / 1/step]
Sets flag "1" when Vt(C) excesses Vt upper limit error threshold (SP3-221-002)
even 1 time.
003
UppErr Flag: M *ENG [0 or 1 / 0 / 1/step]
Sets flag "1" when Vt(M) excesses Vt upper limit error threshold (SP3-221-002)
even 1 time.
004
UppErr Flag: Y *ENG [0 or 1 / 0 / 1/step]
Sets flag "1" when Vt(Y) excesses Vt upper limit error threshold (SP3-221-002)
even 1 time.
011
LowErr Flag: K *ENG [0 or 1 / 0 / 1/step]
Sets flag "1" when Vt(K) excesses Vt lower limit error threshold (SP3-221-004)
even 1 time.
012 LowErr Flag: C *ENG [0 or 1 / 0 / 1/step]