Ricoh D148 - Page 1102

Main SP Tables-3
System Maintenance Section 2-383 D146/D147/D148/D149/D150
SP Mode Tables
Totals up ON time of sub hopper feed clutch (C).
043
Feed Cnt :M *ENG [0 to 99999999 / 0 / 1 ms/step]
Totals up ON time of sub hopper feed clutch (M).
044
Feed Cnt :Y *ENG [0 to 99999999 / 0 / 1 ms/step]
Totals up ON time of sub hopper feed clutch (Y).v
051 Vsg Detect Intrvl [0 to 200 / 10 / 1pages/step]
061 Vsg Page Cnt [0 to 200 / 0 / 1pages/step]
070 LowErr Thresh [0 to 99 / 3 / 1times/step]
071 LowErr Cnt:K
[0 to 99 / 0 / 1times/step]
072 LowErr Cnt:C
073 LowErr Cnt:M
074 LowErr Cnt:Y
081
M/A(RTP)_Std *ENG
[0.000 to 1.000 / 0.220 /
0.001mg/cm2/step]
Sets standard deposit amount of RTP pattern deposit amount target value (K).
091
M/A Thresh_Upp:K *ENG
[0.000 to 1.000 / 0.060 /
0.001mg/cm2/step]
Sets upper limit threshold of RTP pattern deposit amount target value (K).
092
M/A Thresh_Upp:C *ENG
[0.000 to 1.000 / 0.050 /
0.001mg/cm2/step]
Sets upper limit threshold of RTP pattern deposit amount target value (C).
093
M/A Thresh_Upp:M *ENG
[0.000 to 1.000 / 0.050 /
0.001mg/cm2/step]
Sets upper limit threshold of RTP pattern deposit amount target value (M).
094
M/A Thresh_Upp:Y *ENG
[0.000 to 1.000 / 0.050 /
0.001mg/cm2/step]
Sets upper limit threshold of RTP pattern deposit amount target value (Y).