Input Check Table
D146/D147/D148/D149/D150 3-14 System Maintenance Section
084
Shift Tray: Set Detection
System
ENG
[0 or 1 / 0 / 1/step]
01: set
11:not set
Detects that shift tray is set to main unit.
(01: set, 11:not set)
085
Shift Tray: Position Sensor 1 ENG
[0 or 1 / 0 / 1/step]
0: Stop on this side. during
moving towards inner
1: Stop on inner side. during
moving towards this side
Detects shift tray position.
(0: Stop on this side. during moving towards inner,
1: Stop on inner side. during moving towards this side)
086
Shift Tray: Position Sensor 2 ENG [0 or 1 / 0 / 1/step]
*It its a backup sensor with this machine, so "1" is always displayed)
087
SI Bypass SF Paper Contact
Sensor: Front
ENG [0.000 to 3.300 / 0.000 / 0.001V]
Detects side fence position of one action bypass in analog value, and displays
sensor output value.
088
SI Bypass SF Paper Contact
Sensor: Rear
ENG [0.000 to 3.300 / 0.000 / 0.001V]
Detects side fence position of one action bypass in analog value, and displays
sensor output value.
089
SI Bypass SF Position Sensor ENG [88 to 325 / 88 / 1/step]
Displays output value for side fence position sensor of one action bypass.
090
PCU Lubricant End Sensor:Y ENG [0 or 1 / 0 / 1/step]
Not available with C1
091
PCU Lubricant End Sensor:M ENG [0 or 1 / 0 / 1/step]
Not available with C1
To Next Page
Loading...
