Ricoh D148 - Page 1554

Input Check Table
System Maintenance Section 3-15 D146/D147/D148/D149/D150
Input and Output
Check
092
PCU Lubricant End Sensor:C ENG [0 or 1 / 0 / 1/step]
Not available with C1
093
PCU Lubricant End Sensor:K ENG
[0 or 1 / 0 / 1/step]
0: Not end
1: End
Detects whether lubricant of PCU(K) is end or not.
(0: Not end, 1: End)
*Only available with c/d/e models.
094
GAVD Open/Close Detection ENG [0 or 1 / 0 / 1/step]
For checking door open/close during process. No need to operate.
095
Bridge 24V Fuse Detection ENG
[0 or 1 / 0 / 1/step]
0: Not cut
1: Cut
Detects state of 24V fuse on the bridge unit.
(0: Not cut, 1: Cut)
096
Bridge 5V Fuse Detection ENG
[0 or 1 / 0 / 1/step]
0: Not cut
1: Cut
Detects state of 5V fuse on the bridge unit.
(0: Not cut, 1: Cut)
097
Fusing Shading Plate Sensor
/1
ENG
[0 or 1 / 0 / 1/step]
0: Not shading
1: shading
Detects position of fusing shade plate.
(0: Not shading 1: shading)
098
Fusing Shading Plate Sensor
/2
ENG
[0 or 1 / 0 / 1/step]
0: Not shading
1: shading
Detects position of fusing shade plate.
(0: Not shading 1: shading)