SERVICE MODE TABLE
G104 5-6 SM
1001 015 Bit Switch F *CTL
1001 016 Bit Switch G *CTL
1003 [Clear Setting]
1003 001 Init. System
Initializes settings in the System menu of the
user mode.
1003 003 Delete Program DFU
1004 [Print Summary]
1004 001 Print Summary 1
Prints the service summary sheet (a summary
of all the controller settings).
1004 002 Print Summary 2
Prints the service summary sheet (a summary
of all the controller settings and debug
information).
1005 [Disp. Version]
Displays the version of the controller firmware.
1101 [ToneCtlSet]
1101 001 Tone (Factory) *CTL
1101 002 Tone (Prev.) *CTL
1101 003 Tone (Current) *CTL
Recalls a set of gamma settings. This can be
either a) the factory setting, b) the previous
setting, or c) the current setting.
[ToneCtlSet]
*CTL
1102
Sets the printing mode (resolution) for the printer gamma adjustment. The
asterisk (*) shows which mode is set.
• *1200x1200Photo • 600x600Text • 1200x600Text
• 600x600Photo • 1200x600Photo
1103 [PrnColorSheet]
1103 001 ToneCtlSheet
1103 002 ColorChart
Prints the test page to check the color balance
before and after the gamma adjustment.
To Next Page
Loading...
