MACHINE INSTALLATION
SM 1-3 G104
Installation
1.2 MACHINE INSTALLATION
1.2.1 UNPACKING
1. Open the left cover [A] of the printer.
2. Turn the green levers
counterclockwise . Then slowly open
the drum positioning plate .
3. Remove the end of the tape from the
printer.
4. Slowly pull out the eight pieces of tape
protruding from PCU in a horizontal
direction.
5. Close the drum positioning plate. Push
the green lever
to lock the drum
positioning plate. Then turn it
clockwise
.
6. Close the left cover.
G105I903.WMF
G105I901.WMF
G105I902.WMF
[A]
To Next Page
Loading...
