Ricoh G104 - Service Call Conditions

Service Call Conditions
SM 4-5 G160/G161
G160/G161
SC
[Level]
Symptom Possible Cause/Required Action
of the trailing edge is not
detected for one second after
the LDB unit turned on when
detecting the main scan
magnification.
connection
 Defective laser synchronizing detector
 Defective LDB
 Defective EGB
1. Check the connectors.
2. Replace the laser-synchronizing
detector.
3. Replace the LDB.
4. Replace the EGB.
Trailing edge laser detection error: [Y]
211
[C]
The laser synchronizing
detection signal for LDB [Y]
of the trailing edge is not
detected for one second after
the LDB unit turned on when
detecting the main scan
magnification.
Same as SC 210
Trailing edge laser detection error: [M]
212
[C]
The laser synchronizing
detection signal for LDB [M]
of the trailing edge is not
detected for one second after
the LDB unit turned on when
detecting the main scan
magnification.
Same as SC 210
Trailing edge laser detection error: [C]
213
[C]
The laser synchronizing
detection signal for LDB [C]
of the trailing edge is not
detected for one second after
the LDB unit turned on when
detecting the main scan
magnification.
Same as SC 210
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA