PAPER FEED UNIT
SM 1 G392
Paper Feed
Unit Type
4000
1. REPLACEMENT AND ADJUSTMENT
CAUTION
Turn off the main power switch and unplug the machine before attempting
any of the procedures in this section.
NOTE: This manual uses several symbols. The meanings of those symbols are as
follows:
: C ring : screw : connector/harness
1.1 PAPER FEED UNIT
• Remove the paper tray unit from the main unit.
• Pull out the paper tray.
[A]: Upper plate ( x 5)
NOTE: Screw [a] is blue.
[B]: Right upper cover ( x 5, x 1)
[C]: Paper feed unit ( x 7, x 2)
G392R103.WMF
[A]
[B]
[C] [a]
To Next Page
Loading...
