LASER OPTICS
SM 3-7 G104
Replacement
Adjustment
3.3 LASER OPTICS
WARNING
Turn off the main power switch and unplug the printer before you do the
procedures in this section. Laser beams can cause serious eye injury.
3.3.1 CAUTION DECAL LOCATIONS
Caution decal is attached as shown below
WARNING
Make sure to turn off the main power switch and disconnect the power plug
from the power outlet before you do any disassembly or adjustment of the
laser unit. This printer uses a class 3B laser beam with a wavelength of 655
nm and an output of 7 mW. The laser can cause serious eye injury.
G105R927.WMF
G105R901.WMF
To Next Page
Loading...
