IMAGE TRANSFER
G104 6-54 SM
Transfer belt cleaning
[A] Cleaning brush
[B] Seal
[C] Transfer belt drive roller
[D] Transfer belt cleaning blade
[E] Toner collection coil
[F] Pressure spring
The transfer belt cleaning blade removes remaining toner from the transfer belt to
prevent “ghosting” on the next print. This blade is included in the blade holder. The
pressure spring applies pressure to the center of the blade holder. This blade gets
constant pressure from the pressure spring.
The toner collection coil moves the remaining toner to the waste toner bottle from
its opening [G].
G105D114.WMF
[A]
[B]
[C]
[D]
[E]
[F]
[G]
To Next Page
Loading...
