PAPER FEED
SM 6-19 G104
Detailed
Descriptions
6.3.3 PAPER TRAY
Paper Lift
When the tray [A] is set in the machine, the tray arms [B] move along the guide
slopes [C] of the main frame. This makes the springs [D] lift the bottom plate [E].
The bottom plate [E] pushes the paper against the paper feed roller and keeps the
top sheet of paper at the correct height as paper is fed from the stack.
Using the paper pressure switch [F], you can adjust the bottom plate pressure.
When you use thick paper of 75g/m
2
or more, move this switch to the left.
G105D128.WMF
[A]
[C]
[D]
[E]
[F]
[B]
To Next Page
Loading...
