User Replaceable Items
SM 2-1 G160/G161
G160/G161
2. PREVENTIVE MAINTENANCE
2.1 USER REPLACEABLE ITEMS
The user replaces the following items if the service contract requires that the user does
some of the PM.
Item Remarks
PCU 50 KP (YMC, BK)
Transfer Belt Unit 100 KP
Waste Toner Bottle 50 KP
Maintenance Kit
Fusing Unit
Transfer Roller
Paper Feed Roller x 3
Friction Pad x 3
Dust Filter x 2
100 KP
Chart: A4 (LT), 5%
Mode: Continuously Printing
Environment: Recommended temperature and humidity
Yield changes depend on circumstances and print conditions
An error message shows when a maintenance counter gets to the value in the PM table
when the machine’s default settings are used.
It is not necessary to reset counters for each part if the technician does the PM. The
machine detects new components automatically and resets the necessary counters.
To Next Page
Loading...
