Ricoh G104 - Engine Service Mode

Service Mode Table
G160/G161 5-10 SM
1104 054 Set Magenta 14 *CTL
1104 074 Set Yellow 14 *CTL
1104 015 Set Black 15 *CTL
1104 035 Set Cyan 15 *CTL
1104 055 Set Magenta 15 *CTL
1104 075 Set Yellow 15 *CTL
[0 to 255 / 240 / 1/step]
[ToneCtlSave]
1105
Saves the print gamma (adjusted with the Gamma Adj.) as the new Current
Setting. Before the machine stores the new “current setting”, it moves the data
stored as the “current setting” to the “previous setting” memory-storage
location.
[Toner Limit Value]
1106
Adjusts the maximum toner amount for image development.
1106 001 TonerLimitValue *CTL
[100 to 400 / 260 / 1%/step]
1108 [Ext. Toner Save]
1108 001 Mode 1: Text
1108 002 Mode 2: Text
1108 003 Mode 1: Image
1108 004 Mode 2: Image
1108 005 Mode 1: Line
1108 006 Mode 2: Line
1108 007 Mode 1: Paint
1108 008 Mode 2: Paint
DFU
5.2.2 ENGINE SERVICE MODE
SP1-XXX (Feed)
1001
[Lead Edge Reg.] Leading Edge Registration
(Tray or By-pass, Paper Type, Process Speed)
Paper Type ->N: Plain paper 1, N2 or Normal 2: Plain paper 2, Thick2: Thick
paper 2 (see the Specifications table for details on these paper weights)
Process Speed: LS: Low speed, RS: Regular speed
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA