Ricoh G104 - Service Mode Table; Controller Service Mode

SERVICE MODE TABLE
SM 5-5 G104
Service
Tables
5.2 SERVICE MODE TABLE
5.2.1 CONTROLLER SERVICE MODE
1001 [Bit Switch]
1001 001 Bit Switch 1 *CTL Adjusts bit switch settings. DFU
1001 002 Bit Switch 2 *CTL Bit 0 to 2: Not used. Do not change settings.
Bit 3: Changing print language (PCL <-> PS)
0: Enabled
1: Disabled (No change)
Bit 4 to 7: Not used. Do not change settings.
1001 003 Bit Switch 3 *CTL Bit 0: PostScript3 Euro glyph
0: Disabled
1: Enabled (Even if there is no Euro Glyph in
ROM, it is possible to load the Euro Glyph
data.)
Bit 1: Not used. Do not change setting.
Bit 2:PCL5e/5c (HP4000/HP8000)
The left space command is set to “0”, the
machine is changed to “1”
0: Disabled
1: Enabled
Bit 3: PCL5e/GL2: pen # of PW
0: Normal
1: Patch
Bit 4: Tray selecting
0: Select tray is determined auto tray selecting
1: Like HP/SV
Bit 5 to 7: Not used. Do not change settings.
1001 004 Bit Switch 4 *CTL Adjusts bit switch settings. DFU
1001 005 Bit Switch 5 *CTL Bit 0 to 2: Not used. Do not change settings.
Bit 3: Enabled the “%%” command of the
PostScript detection condition for the auto print
language selection function.
0: Enabled
1: Disabled
Bit 4 to 7: Not used. Do not change settings.
1001 006 Bit Switch 6 *CTL
1001 007 Bit Switch 7 *CTL
1001 008 Bit Switch 8 *CTL
1001 009 Bit Switch 9 *CTL
1001 010 Bit Switch A *CTL
1001 011 Bit Switch B *CTL
1001 012 Bit Switch C *CTL
1001 013 Bit Switch D *CTL
1001 014 Bit Switch E *CTL
Adjusts bit switch settings. DFU
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA