SERVICE MODE TABLE
G104 5-8 SM
1104 072 Set Yellow 12 *CTL
1104 013 Set Black 13 *CTL
1104 033 Set Cyan 13 *CTL
1104 053 Set Magenta 13 *CTL
1104 073 Set Yellow 13 *CTL
[0 to 255 / 208 / 1/step]
1104 014 Set Black 14 *CTL
1104 034 Set Cyan 14 *CTL
1104 054 Set Magenta 14 *CTL
1104 074 Set Yellow 14 *CTL
[0 to 255 / 224 / 1/step]
1104 015 Set Black 15 *CTL
1104 035 Set Cyan 15 *CTL
1104 055 Set Magenta 15 *CTL
1104 075 Set Yellow 15 *CTL
[0 to 255 / 240 / 1/step]
[ToneCtlSave] 1105
Saves the print gamma (adjusted with the Gamma Adj.) as the new Current
Setting. Before the machine stores the new “current setting”, it moves the data
stored as the “current setting” to the “previous setting” memory-storage location.
[Toner Limit] 1106
Adjusts the maximum toner amount for image development.
1106 001 TonerLimitPhot *CTL [100 to 400 / 260 / 1 %/step]
1106 002 TonerLimitText *CTL [100 to 400 / 200 / 1 %/step]
[FactoryTestPrt] 1107
Prints the test page to check the color balance before transportation (600 x 600
2 bit). DFU
1108 [Ext. Toner Save]
1108 001 Mode 1: Text
1108 002 Mode 2: Text
1108 003 Mode 1: Image
1108 004 Mode 2: Image
1108 005 Mode 1: Line
1108 006 Mode 2: Line
1108 007 Mode 1: paint
1108 008 Mode 2: Paint
DFU
To Next Page
Loading...
